Cómo reparar una grieta en los cimientos del sótano con resina epoxi
2 min Machine translated History & how-to
2 min Machine translated History & how-to
¿Por qué no más propietarios en Estados Unidos reparan así las grietas de los cimientos?
La mayoría ve una grieta que baja por la pared del sótano, entra en pánico y llama a una empresa que podría cobrar miles de dólares.
Pero este tipo muestra cómo hacerlo con un sencillo kit para reparar grietas y una tarde libre.
Empieza con un martillo y un cincel, y desprende cada trozo suelto de concreto.
Luego pasa una amoladora con un disco de diamante por toda la grieta.
No es por estética. El epoxi solo se adhiere al concreto limpio y sólido, así que hay que quitar todo lo que esté flojo.
Barre, se pone una mascarilla y limpia la grieta con aire comprimido hasta que no quede polvo dentro.
Ahora mira esto, porque es un truquito ingenioso.
Hace agujeros en la caja del propio kit y la convierte en un soporte para los puertos de inyección.
Así puede cargar cada base con pasta epoxi sin ensuciar nada.
Luego presiona los puertos sobre la grieta, uno tras otro, desde la ventana hasta llegar al suelo.
Aquí es donde la mayoría se equivoca. Todavía no rellena la grieta.
Primero, cubre toda la superficie con pasta y la extiende hasta dejarla lisa, sellando alrededor de cada puerto.
Ahora esos puertos son la única entrada y la única salida, así que, cuando entra la resina, no tiene por dónde ir salvo hacia el fondo de la pared.
Una vez que el sellado se endurece, carga la resina de inyección y conecta el tubo al puerto más bajo.
No arriba, abajo. Aprieta despacio y la resina se abre paso por la grieta, rellenándola desde dentro.
Luego sube al siguiente puerto y repite el proceso, puerto por puerto, subiendo por la pared hasta que llega a la mismísima cima.
Y ahí está la genialidad. No se limita a cubrir la grieta.
Rellena todo el grosor de la pared, así que el agua ya no tiene por dónde pasar.
Este es el tipo de trabajo que construyó este país.
Un hombre que ve un problema en su propia casa, se arremanga y lo arregla bien con sus propias manos.
Sin cuadrilla, sin una factura enorme, solo paciencia, el equipo adecuado, y una pared sellada desde dentro hacia fuera.
Así que, en serio—
End of transcript · 383 words · machine translated
Why don't more homeowners in the United States fix foundation cracks like this?
Most people see a crack running down the basement wall, panic, and call a company that could quote thousands of dollars.
But this guy shows how it's done with a simple crack repair kit and a free afternoon.
He starts with a hammer and chisel, knocking out every loose piece of concrete.
Then he runs a grinder with a diamond blade along the whole crack.
That's not for looks. Epoxy only bonds to clean, solid concrete, so anything weak has to go.
He sweeps up, puts on a mask, and blows the crack out with compressed air until there's no dust left inside.
Now watch this, because it's a smart little move.
He pokes holes in the kit's own box and turns it into a stand for the injection ports.
That way, he can load each base with epoxy paste without making a mess.
Then he presses the ports right over the crack, one after another, from the window all the way down to the floor.
Here's the part most people get wrong. He doesn't fill the crack yet.
First, he covers the entire surface with paste and spreads it flat, sealing around every single port.
Those ports are now the only way in and the only way out, so when the resin goes in, it has nowhere to go but deep into the wall.
Once the seal is set, he loads the injection resin and connects the tube to the lowest port.
Not the top, the bottom. He squeezes slowly, and the resin pushes its way through the crack, filling it from the inside.
Then he moves up to the next port and does it again, port by port, climbing the wall until he reaches the very top.
And that's the genius of it. He isn't just covering the crack.
He's filling the full thickness of the wall, so water has no path left to get through.
This is the kind of work that built this country.
A guy who sees a problem in his own home, rolls up his sleeves, and fixes it right with his own two hands.
No crew, no giant bill, just patience, the right kit, and a wall that's sealed from the inside out.
So seriously-
TranslateMom transcribes and translates videos from X, TikTok, YouTube and Instagram. Paste a link and you get a page like this one, in your language.